Recently picked up a 92X full size, and heard about Langdon Tactical's Trigger Job in a Bag through some videos I watched about the gun. I ordered mine with the Elite II trigger, 13lb hammer spring and LTT optimized trigger bar. Working along with Mr. Langdon's video on installing the trigger I got the trigger swapped out with no problems. The stock trigger was good, but the pull weight and feel were noticeably better. The trigger reset was a huge improvement., no take up or creep.. The factory trigger broke cleanly, but had a longer reset and some slack before it engaged the sear. I'm glad I got the 92X, even happier I installed the trigger. I highly recommend the Trigger Job in a Bag, or at the very least the LTT Optimized Trigger Bar, it really does make a great gun better.

Oh my, this stuff if awesome! This is not the sort of thing that I normally spend money on but thanks to my Trump check, I decided to use some of it on this kit. I am very pleased with this TJIAB. I am a big time Glock fan but I am really starting to move to the Beretta 92 platform and this makes it so much sweeter. Thank you to Mr. Langdon and your employees.

Easy Install per video. Crochet hook trick useful. Please with very fast shipping.

Don't think "Is this worth it?". It is. Do it.
aeugh.jpg

The LTT TJIB is a welcome improvement to my M9A3 pistol. Total transparency: I hand-picked my pistol from five G models at the store it was purchased from so the trigger was good, however, there was noticeable stacking at the end of the trigger stroke just prior to the seat releasing the hammer.

The TJIB arrived in just two days.

All parts were present in the package.

I inspected all the parts the the level of polishing was impressive as I do not usually possess the patience to even remotely approach the degree of polish on the hammer and sear interfaces.

There was no fitting required; everything worked as advertised.

The results were great. Trigger weight did not drop much (I stayed with a 14# hammer spring) but you could tell there was a massive reduction in “drag” or friction in the fire control group.

The stacking at the end of the trigger stroke remained BUT IT WAS MUCH LESS PRONOUNCED and not noticeable at the range while shooting.

It was well worth the money and time.

Purchase without hesitation!

Thank you, LTT

I installed the TJIB in my 92A1 using Mr. Langdon's video instruction. The trigger bar did not fit directly and I had to remove material at the front of the pin with a medium stone just as expected per the excellent video. The take up on the trigger was greatly reduced as well as the DA/SA trigger pull weight. The options chosen were the Langdon Optimized trigger bar and the Beretta Elite hammer with a 13 lb hammer spring. The reduction in trigger pull was very noticeable in contrast to the D type spring. Congratulations to Mr. Langdon and his team in developing a product that greatly improves the shootablity of this piece. I am pleased and absolutely satisfied with the product. I am looking forward to running this gun at the range this weekend.