A Wilson Combat Hammer Spring that has been hand polished to better allow the spring to smoothly rotate in the hammer spring cup - improving trigger pull and spring performance. Works in the 92/96 and PX4 Full-Size and Compact Series firearms.
A Wilson Combat Hammer Spring that has been hand polished to better allow the spring to smoothly rotate in the hammer spring cup - improving trigger pull and spring performance. Works in the 92/96 and PX4 Full-Size and Compact Series firearms.
Fantastic product and fast shipping. I put this in my px4 compact carry and it made the d/a pull tons better.
Have a '92 Centurion that I bought used for $450. Detail stripped it, and polished the hammer/strut/sear/trigger bar (1500 grit sandpaper & Flitz w/Q-tips). Reassembled with Wilson flat wire recoil and CS trigger return/extractor/firing pin springs (used factory springs for the rest). Also installed a new locking block. Took her to the range, and she ran like a scalded cat!
Never leaving 'well enough' alone, I then wanted to reduce the DA pull. Tried out a 'D' spring; it was okay. Then a range buddy suggested I try one of LTT's springs. Via e-mail I asked them which one I should install, given I was using a stock hammer and it would serve as a carry pistol (i.e., it needs to ignite whatever I load it with). They recommended the 13#.
2000 rounds later, I've got a DA pull like greased butter (yes, I said that) and not a single light strike - not even with the Monarch (PPU) FMJs I got from Academy.
Seriously considering giving the 12# a whirl!
After installing on my 92FS it feels great very easy to install and trigger pull is great
I bought 2 of these one to go into my px4 and my 92fs and all I can say is I need one for my other px4ccand my M9 great value and also great shipping everything I have gotten here has been A+ customer service Aimee was a great help will buy all my beretta parts from here
Really nice improvement over the factory hammer spring. DA is slightly lighter but much smoother. SA is crisp. Installs very easily and the 12# spring has reliably ignited a variety of primers in my full size PX4. Highly recommended upgrade.
These springs are well worth it. Smooths everything out.
After I installed the hammer spring, Now I have a very smooth trigger pull. I highly recommend you buy this hammer spring.
I got the 12# for use in a PX4 Compact, and just by itself, it made a great difference in my DA shooting. A lot of improvement for the money.
Installed this in PX4 SubCopmact.. Took it to the range, and ran 100 rounds through it. Worked perfect. Very smooth trigger pull. You can really tell the difference with this spring in it.
