Trigger Job in a Bag - Beretta 92 Series

$165.00 - $225.00
(29 reviews) Write a Review

Trigger Job in a Bag from LTT for the 92, 96 and M9 Series Pistols 

After several thousand trigger jobs on Beretta 92s and PX4s, Langdon Tactical Technology offer’s the "Trigger Job in a Bag". We polish and hand-stone all of the components that are part of the firing mechanism.

92, 96 and M9 Series Trigger Job in a Bag includes: Wilson Combat Ultimate Trigger bar, Elite II hammer, Sear, Sear Spring, Trigger Spring, Hammer Strut, and Wilson Combat Reduced Power Hammer Spring.

PX4 Trigger Job in a Bag:Competition Trigger Group including the hammer 

PLEASE SEE OUR FAQ Page for model listings to verify the TJIB will work for you. 

With the following hammer springs, your DA/SA pull weight will be approximately:

  • 11# DA: 5.3 to 6 lbs
  • 12# DA: 5.6 to 6.4lbs
  • 13# DA: 6.3 to 7lbs
  • 14# DA: 7 to 7.5lbs
  • 16# DA: 7.2 to 8 lbs

29 Reviews Hide Reviews Show Reviews

  • 5
    Langdon TJIB

    Posted by Chase DeCroo on Sep 11th 2018

    WOW! Simply amazing what E.L. and Co. can do by polishing a few parts! If you own a 90 series Beretta, I wholeheartedly recommend you spend the coin to make your trigger THE BEST DA/SA Trigger you've ever pulled. It outshines the "action tunes" from other companies! I personally run 2 of these with 13lb hammer springs.

  • 5
    Trigger job in a bag

    Posted by Seth Blakeman on Sep 11th 2018

    The trigger job in a bag works as advertised and I am very happy with it. I installed it in about 45 mins and it greatly reduces the trigger pull. For a while I just relied on the “D spring conversion” and the Langdon Trigger job in a bag blows that away. The quality of the parts and polishing is evident. I have a second 92a1 and I’ll be purchasing another trigger kit soon. I compete in pistol matches and I can’t wait to try it at the next match, thanks LTT.

  • 5

    Posted by Silver_Surfer on Aug 31st 2018

    Wow! Exceeded all my expectations! Wish I found it earlier!

  • 5
    Trevor Ward

    Posted by Trevor Ward on Aug 24th 2018

    I EDC my M9 and want to be as accurate as possible for range time, and to eliminate any negligent hits. Also to maximize my ability to stop a threat under stress, without having to mag dump to get rounds on target. I’m mechanically enclined and had no real difficulty installing the components in a reasonable amount of time. I didn’t rush, and you shouldn’t either. It can be enjoyable. PAY ATTENTION TO THE SEAR POSITION, AND ESPECIALLY THE SEAR SPRINGS ORIENTATION BEFORE YOU REMOVE THEM!!!!!!!! The LTT installation video is good, but these two items are difficult to see on the vid. While it’s disassembled, take this opportunity to detail clean. Fit and finish is excellent. I didn’t have to modify a single thing. I opted for the #13 spring,. I just prefer this for my EDC weapon, and I do carry my M9 daily. I conceal this pistol at 4-430 in an alien gear holster with no problem. I don’t wear oversized shirts and it disappears. I’m not fat or skinny. Performance is unbelievable. I’m serious. My first mag left me with an unintended smile of joy and disbelief lol. Trigger pull: my scale only goes to 8lbs. Stock double action pull was waaayy off the scale. Probably at least 12-13lbs. LTT kit with the #13 spring brought it down to about 6.25 lbs. Stock single action pull was about 6.5lbs. LTT kit brought it to 3.5lbs. The double action pull is very, and I mean VERY, smooth. Pretty much zero stacking. Single action has a crisp break and a short reset. There is a tiny bit of take up after the reset, but it’s effortless so it didn’t affect my aim on follow up shots. I’ve never cared about bullseye shooting. I care about hits on target, in vital areas, in an effective grouping. This kit has greatly Improved my performance with this pistol. My groups at about 25’, shots probably every 2-3 seconds, are all Slightly larger than the size of my fist. 5 1/2” roughly. I consider this to be good accuracy for me, as I’m not a competition shooter, but one who trains for fun, and For social work. This kit is well worth the $$. I believe you will be as pleased and surprised as I still am. Trevor Ward

  • 5
    Awesome on M9A3

    Posted by G on Aug 20th 2018

    The M9A3 comes with a decent trigger compared to other berettas, So I was a little on the fence about ordering this. I ordered the package with the Deluxe hammer, I didn't specify spring weight, I was told later over email I would be sent #13 if I didn't specify.
    All I can say is this upgrade is night/day compared to factory. Glassy smooth and very tactile, DA is wicked consistent. I shot a whole bunch of junk steel case ammo with no failures to ignite the primers.
    If I did indeed get a #13 spring, it doesn't come in terribly light compared to factory, maybe 1/2lb less. 4.5SA and 7.5DA roughly.

    Superb upgrade, don't hesitate to order this! I put it on an all black A3 and the colors look pretty darn good, I'd add pictures if I could!

    ONE word of advice, Check your right grip panel for wear marks, I have found that most trigger bars will rub on the inside of your grip and can effect pull weight, Light sanding on the inside of your grips to remove a little material will solve this!

  • 5

    Posted by Greg T on Aug 10th 2018

    Ernest has achieved what many of us have tried and failed. His Trigger Job in a Bag represents the "turn key" application of a Beretta 92 trigger job. The difference from stock to what you get after is immeasurable.

    The 92-series is enjoying a renaissance, due to guys like Ernest making it into a better shooter's pistol. Buy with confidence.!

  • 5
    Trigger Job In A Bag

    Posted by Rexford Gile on Aug 9th 2018

    First kit into the M9A1 INOX compact took about an hour to install. (Lining up the sear and its spring in the frame for the pin was rather frustrating and tedious when you have baseball mitts for hands). Now looking forward to tackling the 2nd kit install in the INOX Vertec as my learning curve improves. Would definitely purchase again.

  • 5
    Trigger Job in a Bag is Awesome

    Posted by John B on Jul 4th 2018

    I painlessly installed the TJinaB into my new M9A3 in about 20 minutes. The results I got were a very smooth 6 lb DA pull and a super clean 2 lb SA pull. For the price paid and ease of installation, this trigger just can’t be beat. Great job LTT!

  • 5
    92 Trigger Job in a Bag

    Posted by Bill Sack on Jun 27th 2018

    An easy 5 star product. The value of the parts alone justifies the price, but you get the polishing and preparation of them that comes from Ernest's decades of knowledge and experience as well. Spencer Keepers is right; these kits are TOO cheap for what you get.