“The Foundation Belt” from EDC Belt Co, LLC is 1.5" and made for conceal carry out of Cordura and reinforced nylon webbing, in all of the right places, with a Tri-Glide low profile buckle. The Foundation Belt, by EDC was built to be a functional and comfortable belt for concealed carriers. It is a double taper cut, made with 5 rows of stitching to be comfortable, conform to the wearer and to keep the belt from rolling back and a non-reinforced tag to allow the belt to be fed through the pant loops from either direction. It has a combination of softer materials and SCUBA webbing that only places heavy non flexible SCUBA webbing in the areas you should wear a holster - from appendix to strong side on the non tag side and under the loop tape portion for running the tag through holster loops.
Sizing:
Take the closest even number of your pant size and add 2 For IWB
Example: If you wear a 34 waist pant you wear a 36 belt
Odd size belts generally go up to the next even size.
Example: A 35 waist would typically wear a 36 belt.
Note: You CANNOT tighten the belt below it's nominal size. But, you CAN loosen the belt by 3" (more if you don't' need all the velcro to make contact). Belt can be loosened up to 3" but CANNOT bet tightening below it's nominal size. So you are on the edge, order a size smaller.
If you carry OWB, order your actual size.
What are current users saying?
“My old belts were always too stiff, too flexible, too heavy or had too big a buckle....this belt is the perfect balance of function and comfort.” - G.E. OKC, OK
“The Foundation Belt is just that! It’s the foundation of my everyday carry rig.” - G. Austin Norman, OK
Warranty: 90 days from date of purchase.
For product issues contact edcbeltco@gmail.com.
