A: Arizona Firearms Tempe and Arizona Firearms Gilbert carry our firearms. Stop by one of their stores to check them out!
A: No, you cannot. My Tactical Pistol Skills Class is not a Basic course by any means. I often run into issues where people want to take this as their first or second class and they have a very difficult time keeping up. It is a very fast paced class where we do many drills that most consider advanced. Attending my Advanced Class is not an issue of skill or ability, it is an issue of understanding of the fundamentals of how and why I teach and train the way I do. I have a very specific theory of training that is addressed in detail in the standard Tactical Pistol Skills class and not covered at all in the Advanced Class. I have tried a few times to let people in the class that have "the skill" to attend, but they end up looking at me funny when I start talking about certain things and I have to go back and explain, which is a waste of time for the rest of the class.
A: Dimensionally, the hammer springs are the same and will work in the Beretta PX4, M9, 92 and 96 Series guns, however they deliver different performance. A 12# hammer spring in a 92/96/M9 would be considered a competition hammer spring, but in a PX4, it would be perfectly suitable for duty or EDC.
A: YES.
A: Check you sear spring. it is very likely that you installed it incorrectly.
A: Carry Bevel Package is $750 and includes:
- Dehorning and carry bevel on the frame and slide
- Mag well bevel
- Re-Anodize the frame
- Cerakote the slide
- vNP3 finish on all small parts except for extractor and springs
A: The NP3 Option includes an NP3 finish on all of the metal parts in the firearm, EXCEPT for the frame, slide, and barrel.
A: No, none of our firearms are California compliant. If you own a PX4, we can do the PX4 (Compact or Full-size) Conversion,
but we cannot sell you an PX4 Carry, PX4 Compact Carry or 92 Elite LTT.
A: No, we do not. There is not much that can be done to improve the trigger on that firearm.
A: With the following hammer springs, your DA/SA pull weight will be approximately:
- 11# DA: 5.3 to 6 lbs
- 12# DA: 5.6 to 6.4lbs
- 13# DA: 6.3 to 7lbs
- 14# DA: 7 to 7.5lbs
- 16# DA: 7.2 to 8 lbs
- #11 DA 6 to 7lbs
- #12 DA 7 to 8lbs
With the Single-Action will be between 3.5 and 4 lbs for both the 92/96 and PX4.
A: Yes. The Trigger Job in a Bag with work with any Beretta 92, 96 and M9 models, including the 92 Compact.
A: Yes. The Trigger Job in a Bag with work with any Beretta 92, 96 and M9 models, including the 92 Compact.
A: Check you sear spring. it is very likely that you installed it incorrectly.
A: No, the PX4 TJIB will work in the PX4 Full-size and Compact
A: Yes, the Trigger Job in a bag includes work on the components that are part of the firing control system.
We do not do anything with the trigger itself.
A: Any M9A1, M9A3 or Vertec holster will work with the Elite LTT
A:
- The height of the front sight is .220 inches from the base of the dovetail
- The width of the fiber optic rod is: .055 inches
- The height of the rear sight is: .290 inches
- The rear sight notch width is: .150
- The Front Sight post is .110 inches wide
A:The Trigger Job In A Bag will fit the following Beretta pistols, black and "Inox" Stainless versions. Note: Some Stainless "Inox" models have stainless trigger bars and hammers, the TJIB does not come with stainless steel or Stainless look parts. (Some Beretta Inox models have chrome plated parts to match the stainless finish, but the parts are not stainless steel)
- 92 SB
- 92 SB Compact
- 92 F
- 92 F Compact L/li>
- 92 FS Compact L
- 92 FS Compact L, Type M
- 92 FS Centurion
- 96 FS Centuriion
- 92 FS
- 96 FS
- 92 G
- 92 G Compact L
- 96 G Compact L
- 92 G Centurion
- 96 G Centurion
- 96 G
- 92 FS Brigadier
- 96 FS Brigadier
- 92 G Brigadier
- 96 G Brigadier
- 92 GSD
- 92 G Elite
- 96 G Elite
- 92 G Elite II
- 96 G Elite II
- 92 G Elite A1
- 96 G Elite A1
- 92 FS Vertec
- 96 FS Vertec
- 92 G Vertec
- 96 G Vertec
- 92 A1
- 96 A1
- 92 G Brigadier Tactical
- M9
- M9A1
- M9A3
- 92 G Elite LTT
A: We have partnered with Aztech Armory for Canadian exports. Please email info@aztecharmory.com to place your order.
A: Yes, we offer a discount code on all firearms to active LEO and Military. The Code is LTTLEO2019 and you will need to submit a copy of your active credentials to sales@langdontactical.com before your order will be processed.