Want to have the LTT Red Dot Optic Cut on your existing 92?
No problem – we’ve got you covered with our brand new LTT RDO Cut Rebuild Package:
This Custom Gun Work package includes all of the following:
- A full top end rebuild to replace all of your stock components with our patented replacement components
- Slide milling, and prep for our proprietary RDO plate as well as cerakote on the slide in Elite Black or whatever color it comes in as. IE: M9A3 FDE slides, will be coated in FDE.
- Our proprietary optic plate in the Trijicon RMR footprint (fits RMR, SRO, Holosun 507C and others that fit the RMR footprint)
- Red dot height front sight that matches the adapter plate built in rear sight
- Return shipping to the same address the slide was shipped from
Our RDO customization will only work on the 92 Elite LTT, 92X, M9A3, 92A1/96A1 as the machining is set-up for proper deck height and sights on these models ONLY.
This means it will work on the 96A1 and 96 Vertec Slides.The RDO will not work on the Wilson Brigadier Slide, but it will work on the Wilson Centurion Tactical.
The screws included in the package are (2) Holosun to plate 4 x 40 5/16 and (2) RMR to plate 4 x 40 3/8. TORC Spec: 10 inch pounds.
**An RDO/Optic sight is NOT INCLUDED in this package**
To send your slide in for the LTT RDO Cut Rebuild Package, please follow these steps:
- Add this item to your cart and check out like any other product.
- Fill out the Custom Gun Work form and include your order number (five digit number you receive at checkout).
- Pack your slide for shipping and include the filled out CGW form. Your slide MUST BE CLEANED or you will be charged a $15 cleaning fee.
- Ship the slide & documents to the address provided on the CGW form.
- LTT will notify you when we are returning the slide
***NP3 SLIDES: If you are sending us a slide with NP3 levers, please add the Product Add On Fee to your cart - this covers the difference between the included black levers and new NP3 Levers. New amended levers are necessary for this system**
Please allow 6-10 weeks for all work to be performed from time of receipt. If you want to verify that it arrives to LTT, please ship signature required to the address on the order form. Return Shipping is a fixed rate will be charged when you place your order. You are responsible for inbound shipping and following all processes listed on this form.
CHECK OUT THE NEW LTT GEAR HERE including RDO IWB holsters, T-shirts and RDO hat!
Frequently Asked Questions regarding the RDO Cut for 92 Series Pistols:
Q: Can you do the RDO on my 92/92 FS slide?
A: No; The top of the 92/96FS slide is slightly taller than the Vertec slide. The CNC program and the adaptor plate is only set up for the specific height of the Vertec/Elite LTT/M9A3/92A1 slide.
Q: Can you do the RDO cut on my Brigadier Slide?
A: No; The top of the Brigadier slide is slightly lower than the top of the Vertec slide. The CNC program and the adaptor plate is only set up for the specific height of the Vertec/Elite LTT/M9A3/92A1 slide.
Q: Can you do the RDO Cut to my 92/96 D, 92/96 D Vertec, 92X Performance, 92/96 Combat, 92/96 Stock?
A: No; These models do not use a slide-mounted safety lever and therefore have a different firing pin. We do not make a firing pin that works with these model pistols.
Q: What red dot optics fit the RMR Footprint?
- Trijicon RMR
- Trijicon SRO
- Holosun HS407C
- Holosun HS507C
- Holosun HS508T
- Riton X3 Tactix PRD
- NcStar VISM FlipDot Pro
- Swampox Kingslayer
See the videos page for videos from the range, shop, drop test and drop test after thoughts.
Still have questions? Check our Frequently Asked Questions (FAQ) page for more information!
Videos Hide Videos Show Videos
30 Reviews Hide Reviews Reviews
I have an M9A3, which is close to a perfect gun for me. Older design so I was never expecting to be able to ever mount a red dot to it. LTT solved that and made a close to perfect gun, more perfect. It is not some half a$$ed cut slide and plate. There are no tool marks, all the screws are marked for torque, the slide was cerakoted back to looking new. I wish this red dot slide cutting would have been available years ago. The plate and sights are built like a tank, I’ll definitely carry this one for any upcoming apocalypse(s)
In August 2020 I ordered a LTT Elite 92G. Previous purchases from Langdon include the excellent PX4CC and a “few others 92s” (wink). The difference is this gun was ordered in the Centurion size with the RDO cut. In addition the gun was completely beveled for carry, the barrel was cut flush with the front of the slide + re-crowned, full-house trigger job, NP3, and a very sharp gray finish was applied to slide. (Think PX4CC color combination).
After hunting around for the right Trijicon RMR the gun was assembled (great video from LTT on Langdon tactical website) and taken to the range. As usual the fit finish and craftsmanship of the pistol prove worthy of the wait time and expense. If you’re on the fence, get off and jump onto the side of the of the RDO LTT. .So worth it! This pistol holds 1.7” at 25 yards with 147grn Fed HST and will hold on a 3x5 card out to distances beyond practical found in typical pistol deployments.
The Langdon Tactical team brings to market a really exceptional product that is in keeping with custom firearms manufacturers who won’t compromise. Thank you Marine for your fine work, great turnaround time, and for improvements on a platform that was long overdue. Way better than the one they issued me in the Corps! SF.
I was very pleased with mount it fit mi new trijicon RDO site perfect. The instructions and video were great
The quality of the milling and finish was outstanding. Very high quality. I put on a Holosun 507C and fit was perfect. Almost no adjustment was needed to zero the red dot. Attests to how accurately the milling was done. I could not be happier.
I've been shooting handguns for the past 25 years, and had been apprehensive about getting into MRDS equipped pistols for the past 10-years. My wife's nephew works as a firearms trainer for a police agency in Chicago and showed me data of why it's now worth it to go this route. My M9A3 was my first choice to get the work done. LTT's work is (as usual) outstanding. Ernest's video on YouTube made installation quick, easy, and painless. The cuts are clean and the mount fit the RMR perfectly. In under 10 minutes I was able to get everything done. Congrats on a superb product which will allow me to use this pistol even more and better than before.
I have been a Beretta fan since the my Marine Corps days. Since that was in excess of 30 years ago, my eyes are not what they used to be. Hence my Elite LTT, (as awesome of a pistol as it is) was not getting any use.
I jumped on the opportunity to have the Langdon Team work their magic on my slide. When it arrived, I was instantly reminded of the joy of shooting the 92 series again! This thing shoots great and it way more accurate that I am! As a side note, I am completely amazed at the bag of parts that came back to me. I knew that they had to do some fabrication and engineering but, had no idea how much until I saw the stack fo parts that were replaced!
Awesome job! Thank you for continuing to be innovative on such a fantastic platform! The Elite LTT has now returned to it's favored position in my range bag while it's little cousin (PX4 compact carry - by LTT) is my daily carry.