It's here! The 92 Elite LTT with a low mount Red Dot Optic Cut Slide (Full Size, Centurion, or Compact)

After years of development, Langdon Tactical is very proud and excited to introduce a Micro Red Dot capable Beretta 92. This has been no easy task as the internal workings of the 92 slide have made the "proper" low mounting of a red dot optic impossible. With the design of 5 new components and a custom mounting plate specific for the Beretta 92, Langdon Tactical can properly low mount a micro red dot optic.

When we say low, we mean very low: Our system has a dot height above the center of the bore of .85" (when paired with a Trijicon RMR), which is as low or lower than most direct milled striker-fired systems.

A re-engineered firing pin and firing pin block permits the super-secure mounting of an adapter plate that is held in place with three mounting screws, a front dovetail, and a center indexing boss milled into the slide. This plate has a built-in back-up rear sight that mates up with a newly designed front sight for the Elite LTT and other Vertec type slides. This new system is a game-changer for the Beretta 92 owners.

This RDO package comes with the red dot height front sight that matches the adapter plate built in rear sight pre-installed, an optimized performance trigger bar and a 13# hammer spring. The RDO guns are 'G-model'/decock only. The 92 Elite LTT ships with (3) 18 rd magazines. The Carry Bevel Model includes the NP3 parts and trigger job.

Carry Bevel RDO pistols include the LTT Trigger Job & NP3 components. 

**An RDO/Optic sight is NOT INCLUDED in this package** The screws included in the package are (2) Holosun to plate 4 x 40 5/16 and (2) RMR to plate 4 x 40 3/8. TORC Spec: 10 inch pounds.

The 92 Elite with RDO Slide ships free of charge from LTT to your FFL in the lower 48 - freight charges to Alaska, Hawaii, or non-US addresses may apply. California, this firearm are not on the CA roster. 

FAQ's: 
Q: What red dot optics fit the RMR Footprint? 

• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T
• Riton X3 Tactix PRD
• NcStar VISM FlipDot Pro
• Swampox Kingslayer

Looking to upgrade your existing 92?
Grab a new Elite LTT RDO Slide  or Upgrade your existing slide with our RDO Solution

VIEW SPECS

LEAD TIMES:

• 92 Elite LTT with Trigger Job (Full Size & Compact): 4-6 weeks
• 92 Elite LTT with Trigger Job (Centurion): 4-6 weeks
• 92 Elite LTT with NP3: 4-8 weeks for ship due processes involved and high demand.
• 92 Elite LTT with Carry Bevel: 8-12 weeks for ship due work involved and high demand.

CHECK OUT THE NEW LTT GEAR HERE, including RDO holster, hat and t-shirts!

See the videos page for videos from the range, shop, drop test and drop test after thoughts.

Still have questions? Check our Frequently Asked Questions (FAQ) page for more information!